How To Get Water out of Your Phone

Accidental water exposure to your phone can be a major cause for concern, potentially leading to irreversible damage. Nevertheless, if your phone gets wet, there are some steps you can take immediately to increase your chances of saving it. This article will guide you through various proven methods to remove water from your phone.

How To Get Water out of Your Phone

Here’s what you should do if you drop your phone in water or get it wet:

1. Power Off Your Phone

  1. Quickly power off your phone to minimize the risk of short circuits.
  2. Do not press any buttons or attempt to charge the device.
  3. Carefully remove any phone covers or cases.

2. Dry The Phone From The Water

  1. Gently wipe the water off the exterior of the phone using a soft cloth or towel.
  2. Shake the phone gently to help dislodge any trapped water from the ports and openings.
  3. Use a dry cloth or cotton swab to carefully dab any visible water droplets from the device’s crevices.

3. Vacuum and Absorbing Materials

  1. Grab a vacuum cleaner with a small nozzle attachment.
  2. Set the vacuum to the lowest setting and slowly run the nozzle over the phone’s openings to encourage airflow and remove trapped water.
  3. Alternatively, you can place the phone in a sealed bag with uncooked rice, silica gel packets, or desiccant pouches. These materials help absorb moisture and can be found in various electronic stores.

4. Use a Hairdryer or Air Compressor (with caution)

  1. Set the hairdryer to the lowest heat setting or use a cool airflow option.
  2. Blow air into the phone’s openings from a safe distance to disperse the water. Keep the hairdryer moving to avoid overheating the phone.
  3. Similarly, an air compressor can be used with low pressure to remove water but ensure the pressure is safe for electronic devices.

5. Isopropyl Alcohol Bath

  1. Isopropyl alcohol (rubbing alcohol) can effectively displace water inside the phone.
  2. Submerge the phone in a container filled with isopropyl alcohol for a few minutes.
  3. Remove the phone and gently shake off excess liquid. Allow it to air dry for 24-48 hours before attempting to power it back on.

Conclusion

While water damage is a serious concern for phones, following these methods immediately after water exposure can significantly increase the chances of saving your device. If these steps do not solve the issue, it is advisable to seek professional help or contact your phone’s manufacturer for further guidance. Prevention is always better, so consider investing in a waterproof case or practicing caution around water with your phone.

Also, you can read: Sound to Get Water out of Phone

Leave a Reply

Your email address will not be published. Required fields are marked *